Next wizard step of setting geocoding by address is setting parameters of geocoded features and saving settings file (figure 77-15).
Figure 77-15. Geocoding wizard, page “Setting parameters”
Setting parameters of point features and random deviation was described in previous subsections.
If the box Apply even/odd segments was not checked at the step of setting searching feature type (figure 77-13) (that is, even and odd addresses are located in one and the same segment), the user can specify values of parameters controlling the distance of created feature from the segment.
Using radio buttons Even numbers on the right and Even numbers on the left the user can locate geocoded features with even numbers on the right from the segment and with odd numbers – on the left and vice versa. In the field Distance from segment one can indicate at which distance from the segment geocoded features should be placed. The distance is specified in map units.
If each street segment is specified by even and odd segments then the contents of the pane Distance from Segment remains disabled.
 |  |
